Product Detail

Product Details

Shimaore Tiles as one of the leading exporters of glazed wall tiles, Digital Wall Tiles, Heavy Duty Industrial Tiles, Polished Porcelain Tiles (fully vitrified) based in India.

Product Detail
Our Key Product ranges are Digital Ceramic Wall Tiles, Parking Tiles and Vitrified Tiles. With the help of using latest Digital Printing, Roto Printing, and Flat Printing technology, we produce contemporary ceramic wall floor tiles in below given size format with various finishes like Satin, Glossy, Matt and Rustic. Parking Tiles is made of vitrified body which is widely used at heavy traffic (Parking) area.
WALL TILES SIZE PARKING TILES SIZE VITRIFIED TILES SIZE CERAMIC FLOOR TILES SIZE
300x600 mm 300x300 mm Ivory 600x600 mm Nano 300x300 mm
450x300 mm 300x300 mm Terracotta 600x600 mm DoubleCharge
250x375 mm 300x300 mm Digital Parking Tiles 600x600 mm Rangoli Designs
200x300 mm 300x300 mm Cool Roof Tiles 600x600 mm Dark Colours (Colour Body)
300x300 mm Heavy Duty Moroccon Series 600x600 mm GVT
16x16 Parking Tiles 600x600 mm PGVT
18x18 Moroccon Series 600x600 mm HGPGVT
1200x600 PGVT
1200x600 HGPVT
800x1600 mm PGVT
Wall Tiles Laying Instruction
SHADE/SIZE VARIATION ARE INHERENT CHARACTERISTICS TO CERAMICS. FIXING TILES WITH THICK BED MORTAR

  •     Ample lighting should be provided. Each box should be spread & mixed on the floor to check for any variation. Mixing of tiles brings harmony to shade by avoiding obvious patches.
  •     The area to be tiled should be free from all kind of dust/grime etc. Surface should completely smooth & flat.
  •     Prior to fixing, tiles should be immersed in water for 15/20 minutes.
  •     The sand & cement ratio should be 3:1 with 3 parts of sand to 1 part cement. The cement quality should preferably be Grade 53. Approximately 1 inch (25mm) completely flat thick bed of mortar, free of air voids should be spread up to the workable reach of mason.
  •     Avoid rich application of neat cement/mortar (application of rich cement mortar/cement may lead to cracks developing on tiles due to cement pinch).Tiles should be fixed on the bed by sliding & tamping with wooden or rubber mallet. Spacers between the tiles should be between 2-5mm as per the usage & area of application.
  •     Remove spacers after 24 hours from laying the til
  •     Fill the joints with grouts as directed by Grout manufacturers

FIXING OF VITRIFIED/CERAMIC TILES WITH THIN BED MORTAR/ADHESIVES

  •     Make sure the tiling area is clean, flat & free from dust & any loose debris. Ample lighting should be provided.
  •     A thin bed of adhesive should be prepared, with approximately 2-3mm thickness
  •     Always prepare adhesive according to the requirement, which can be consumed within the prescribed pot life.
  •     Spacers should be placed between the tiles as per requirement (2-5mm) & should be removed after 24 hours.
  •     Grouting should be done after the removal of spacers. Extra grout should be removed with the help of damp sponge.